CMS ERROR
短信业务失败结果码：CMS ERROR：<err>
短消息业务失败结果编码描述一个移动设备或网络的错误。其作用与错误结果编码类似。该编码常在一个指令失败时出现。返回的结果码为：+CMS ERROR: <err>
数字型<err>取值 |
冗长方式的<err>取值 |
解释 |
|---|---|---|
| 1 | Unassigned(unallocated) number | |
| 3 | No route to destination | |
| 6 | Channel unacceptable | |
| 8 | Operator determined barring | |
| 10 | Call barred | |
| 11 | Reserved | |
| 16 | Normal call clearing | |
| 17 | User busy | |
| 18 | No user reponding | |
| 19 | User alerting,no answer | |
| 21 | Short message transfer rejected | |
| 22 | Number changed | |
| 25 | Pre-emption | |
| 26 | Non-selected user clearing | |
| 27 | Destionation out of service | |
| 28 | Invalid number format (incomplete number) | |
| 29 | Facility rejected | |
| 30 | Response to STATUS ENQUIRY | |
| 32 | Normal,unspecified | |
| 34 | No circuit/channel available | |
| 38 | Network out of order | |
| 41 | Temporary failure | |
| 42 | Switching equipment Congestion | |
| 43 | Access information discarded | |
| 44 | Requested circuit/channel not available | |
| 47 | Resources unavailable, unspecified | |
| 49 | Quality of service unavailable | |
| 50 | Requested facility not subscribed | |
| 55 | Requested facility not subscribed | |
| 57 | Bearer capability not authorized | |
| 58 | Bearer capability not presently available | |
| 63 | Service or option not available, unspecified | |
| 65 | Bearer service not implemented | |
| 68 | ACM equal or greater than ACM maximum | |
| 69 | Requested facility not implemented | |
| 70 | Only restricted digital information bearer capability is available | |
| 79 | Service or option not implemented, unspecified | |
| 81 | Invalid transaction identifier value | |
| 87 | User not member of CUG | |
| 88 | Incompatible destination | |
| 91 | Invalid transit network selection | |
| 95 | Semantically mandatory information | |
| 96 | Invalid mandatory information | |
| 97 | Message type non-existent or not implemented | |
| 98 | Message type not compatible with protocol state | |
| 99 | Information element non-existent or not implemented | |
| 100 | Conditional information element error | |
| 101 | Message not compatible with protocol | |
| 102 | Recovery on timer expiry | |
| 111 | Protocol error, unspecified | |
| 127 | Interworking, unspecified | |
| 128 | Telematic interworking not supported | |
| 129 | Short message Type 0 not supported | |
| 130 | Cannot replace short message | |
| 143 | Unspecified TP-PID error | |
| 144 | Data coding scheme (alphabet) not supported | |
| 145 | Message class not supported | |
| 159 | Unspecified TP-DCS error | |
| 160 | Command cannot be acted | |
| 161 | Command unsupported | |
| 175 | Unspecified TP-Command error | |
| 176 | TPDU not supported | |
| 192 | SC busy | |
| 193 | No SC subscription | |
| 194 | SC system failure | |
| 195 | Invalid SME address | |
| 196 | Destination SME barred | |
| 197 | SM Rejected-Duplicate SM | |
| 198 | TP-VPF not supported | |
| 199 | TP-VP not supported | |
| 208 | SIM SMS storage full | |
| 209 | No SMS storage capability in SIM | |
| 210 | Error in MS | |
| 211 | Memory Capacity Exceeded | |
| 212 | SIM Application Toolkit Busy | |
| 213 | SIM data download error | |
| 224 | CP retry exceed | |
| 225 | RP trim timeout | |
| 226 | SMS connection broken | |
| 255 | Unspecified error cause | |
| 300 | ME failure | ME 错误 |
| 301 | SMS service of ME reserved | 预留 ME 的 SMS 业务 |
| 302 | operation not allowed | 操作不允 |
| 303 | operation not supported | 操作不支持 |
| 304 | invalid PDU mode parameter | PDU 模式下无效的参数 |
| 305 | invalid text mode parameter | TEXT 模式下无效的参数 |
| 310 | (U)SIM not inserted | SIM 卡未插入 |
| 311 | (U)SIM PIN required | 需要 SIM 卡的 PIN |
| 312 | PH-(U)SIM PIN required | 需要 PH-SIM 卡的 PIN |
| 313 | (U)SIM failure | SIM 卡故障 |
| 314 | (U)SIM busy | SIM 卡遇忙 |
| 315 | (U)SIM wrong | SIM 错误 |
| 316 | (U)SIM PUK required | 需要 SIM 卡的 PUK |
| 317 | (U)SIM PIN2 required | 需要 SIM 卡的 PIN2 |
| 318 | (U)SIM PUK2 required | 需要 SIM 卡的 PUK2 |
| 320 | memory failure | 存错错误 |
| 321 | invalid memory index | 无效的存贮索引 |
| 322 | memory full | 存储满 |
| 330 | SMSC address unknown | 短信中心号码未知 |
| 331 | no network service | 无网络服务 |
| 332 | network timeout | 网络超时 |
| 340 | no +CNMA acknowledgement expected | 无预期的+CNMA 确认 |
| 500 | unknown error | 未知错误 |
| 512 | USER ABORT | （适用于cat1 模块） |
| 513 | UNABLE TO STORE | （适用于cat1 模块） |
| 514 | INVALID STATUS | （适用于cat1 模块） |
| 515 | INVALID ADDR CHAR | （适用于cat1 模块） |
| 516 | INVALID LEN | （适用于cat1 模块） |
| 517 | INVALID PDU CHAR | （适用于cat1 模块） |
| 518 | INVALID PARA | （适用于cat1 模块） |
| 519 | INVALID LEN OR CHAR | （适用于cat1 模块） |
| 520 | INVALID TXT CHAR | （适用于cat1 模块） |
| 521 | TIMER EXPIRED | （适用于cat1 模块） |
| 528 | PDU 中无效（非16 进制）字符 | |
| 529 | PDU 长度不正确 | |
| 530 | SMS SEND FAIL | （适用于cat1 模块） |
| 531 | 根据制造商不同而变化 | |
| 532 | 地址中有无效(非16 进制)字符 | |
| 533 | 无效地址 | |
| 534 | PDU 长度（UDL）不正确 | |
| 536 | SCA 长度不正确 | |
| 537 | 无效的第一个8 位字节(应为2 或34) | |
| 538 | 无效的命令类型 | |
| 539 | SRR 位未设置 | |
| 540 | SRR 设置 | |
| 604 | unspecified parsing error | 未指定的解析错误 |